Project Djurö Bridge

We are certified rust painter with great knowledge and long experience in painting and finishing. We have various checks and balances to ensure quality, so that it meets the standards and expectations through coats, display, report for basic control and dew point meter, etc. The protective coating you apply a color coating on a surface with a paint sprayer or brush. The color is usually made up of solvents, adhesives and pigments. The drying process evaporates the solvent and pigmented binder remains on the surface. A well-cleaned surface is very important to get good adhesion between the paint and the surface. When coating on steel or zinc are blasting of various kinds necessary for a good result.

We perform mainly corrosion protection systemss C3, C4, C5 and Im2.

The quality of the document Statement of Basic Control for Protective Coatings , the following entries:

• Control of environmental conditions, which ensured that the steel surface temperature at the pre-treatment and painting is at least 3 ° C higher than the ambient dew point or in accordance with the guidance given in ISO 8504-2:2001.

• Control of the pretreated steel substrate to be coated is intended purity, assessed according to EN ISO 8501-1:2007 (SS 05 59 00) and intended roughness, assessed according to ISO 8503-2:1995.

• Measurement of coating thickness according to ISO 19840:2005.

• Control of the performance of corrosion protection are otherwise in accordance with Section 8:7 of BSK 07th

BRITAB has 40 years experience of advanced protective coating!